Urgent Locksmith Waterloo Help
Urgent Locksmith Waterloo Help will come to you if you want to mount a new door on an existing frame, or if you want to install a lock. Call for our Urgent Locksmith Waterloo Help all 24/7! Our dispatch will answer day or night to all your questions, and will sent to you a Urgent Locksmith Waterloo Help team.
If your sliding door is sticking, or opening in a trembling fashion you may just need to replace the rollers. A sliding door repair is much cheaper than replacing the entire door. We will talk you through what you need to fix it yourself.
Call our dispatch for more information.
Remove the handles from the door, using a Philips-head screwdriver. Then replace the bottom screw in the hole where it was affixed to the handle; to prevent the latch from falling into the door frame. Two screws on the end of the door secure the latch. Remove these two screws, and gently pull out the latch mechanism and its cartridge.
Finally, bring the latch into your local hardware store to find a compatible replacement. Reverse the previous steps to install the new latch. If you replace the latch and your sliding patio-door lock still does not work correctly; use the model information you determined earlier to replace the entire mechanism and install a new lock.
Call us for more information, all 24/7!
The first thing you will need to do is remove the door. It is best to check that you have enough room to do this; without adjusting the rollers. Just lift up on the door a little bit and see how much room you will have. So long as you have the room, go ahead and lift the door out; by pushing up on the door and pulling the bottom of the door out. If you do not have enough room you can adjust the rollers; by locating the screws on the track near the rollers. Just screw them counter-clock wise until you have the room needed.
Now that the door is off the track, you can see what style roller you have. Depending on the roller type there may be a few ways to remove them. Usually you will find a mounting screw located near the spring mechanism. If the screw is not there; check just above the screws used to adjust the rollers. Some doors will have a slotted area where the screw is sitting. Some doors use just one screw for both adjusting and mounting; remove the screw entirely.
Our mobile and local Urgent Locksmith Waterloo Help is on call 24/7 – call us today!