Ready 24 Hour Locksmith Saint George Help

Ready 24 Hour Locksmith Saint George Help has on board of our specialty units, all we need to provide any door service. Looking to have a fast service? Call Ready 24 Hour Locksmith Saint George Help today!

Ready 24 Hour Locksmith Saint George Help

Ready 24 Hour Locksmith Saint George Help

For a do it yourself project, first you have to be arming yourself with a basic knowledge; of how your sliding patio screen door operates; so you can reduce the amount of frustration that it causes you. Remember that it is not a mechanically complex item; so the solutions to fix problems should never be that complex either.

Keep in mind that our team is always ready to help, all 24/7!

Take the time to look at it closely, and you can clearly diagnose the problem; and then take the appropriate steps to solve it. The tools and supplies needed for this project are not many. Rollers, a screwdriver, a spline roller, screening material and a razor blade or a utility knife. And of course, the spline.

When you have to replace a damage screen, there are two things ;you need to become familiar with, fast. After the screen itself, the most important material is the spline; the narrow rubber tubing that locks the screen in a groove around the frame. Spline comes in various diameters; with some sizes differing in diameter by only 1/64 in. and matching your new spline to the old is important.

You will want to have a spline-installation tool. This pizza-cutter-like device has a roller at each end. The convex end forms the screen in the groove; and the concave end presses the spline in place. If the screening material itself is not damage, you can reuse it. Begin by removing the spline (the black rubber material that holds the screen cloth into the frame).

When you have it out, lay the screen material back over the frame; and then put the spline back in over the top of the screen. You can use a flat headed screwdriver to remove the spline. While you can also use the screwdriver to re-install the spline, it is not the best way. If you make one small slip, the screwdriver will punch a hole in your screen.

Call us today for help!

The best and safest way to install spline is with a spline roller. They are quite inexpensive and should be available at any hardware store. If you need to replace the screen because the cloth itself is damaged, make sure you buy enough material to cover the entire opening.

Ready 24 Hour Locksmith Saint George Help is at your service day or night, 24/7, so call us today!