24 Hour Locksmiths Kitchener Team

24 Hour Locksmiths Kitchener Team is here day and night, to come and help you with a key, a door or a lock, so you can call for our help today. Call 24 Hour Locksmiths Kitchener Team for affordable and reliable and fast services. Our 24 Hour Locksmiths Kitchener Team will serve you at any time.

24 Hour Locksmiths Kitchener Team

24 Hour Locksmiths Kitchener Team

Our company has master locksmiths ready at any time to come to your help and fix that hinge; that gives you problems. We are fully equipped with everything needed to help in minutes. If you are one of those handy people and repair the hinge by yourself, here are some tips for you.

Keep in mind that we can come to your help in 15 to 20 minutes!

When drilling a pilot (starter) hole for a wood screw in a hinge, use a self-centering drill bit. They ensure a perfectly centered hole. If the hole isn’t centered the screw will go in crooked and leave the screw head a little out. This could prevent the door from shutting properly.

Use a dial caliper that probes to gauge the depth of the hole for pre-cutting a dowel filler. This way you don’t have to cut flush against the mortise or jamb. If you have an automatic closer on your door, install a foot to hold it open; or use a wedge at the floor. Do not place a wedge at the top corner of the door above the hinge; between the edge of the door and frame; as it will stress the screws in the top hinge and cause them to fail.

There is a file attachment that goes on the power drill. You can use this attachment to file down the head of the screw; if it prevents the hinge from closing. This you can do with the screw in the door. One warnings is in place. Driving anything into the original screw hole(s) must be done very gently; to avoid splitting the jamb. Light taps with a hammer until the glue just starts to squeeze out is sufficient.

24 Hour Locksmiths Kitchener Team will send an expert to you at any time you need help; providing a fast and affordable job.